Southgate Mold Removal

Southgate Mold Removal is consistently ranked as one of the best service options for mold removal in the Bay Area. Our group of regional mold removal specialists is all set to serve you 24/7. Give us a call today for the most complete and thorough mold removal option in Southgate, California!

Southgate Mold Removal and Restoration

Mold and mildew thrive and grow in warm and wet locations that are prevalent throughout homes and businesses in the Greater Southgate area. If given the opportunity to grow, mold could cause severe damage to your home or business. Not only can it ruin your structure, however mold can also position a major health threat to anybody and everybody inside. While mold can be caused my water damage, it can also be brought on by bad air circulation enabling moisture to become trapped.

If you are trying to find mold removal for your home or business in Southgate, California, Southgate Mold Removal will deal with you to remove any and all mold problems while helping to bring back anything that may have been damaged while doing so. Southgate Mold Removal will come out and perform a mold assessment uses overall mold remediation by tidying up mold and helping to create a much healthier atmosphere and improving the air quality in your house or business!

Call Today

Residential and Commercial
Mold Inspection and Removal

When left neglected, mold will grow at a rapid rate. When you notice (or suspect) mold, please do not attempt and clean it up yourself as it is not just dangerous, however a number of the solutions that you discover online have been shown inefficient, and can in some cases even cause larger problems. Schedule a call to get us out there today!

Southgate Mold Removal Service Area

In addition to Southgate California, Southgate Mold Removal also services many additional cities, towns, and communities in the Bay Area. If you don’t see your city listed, please give us a call at (669) 799-5865 .  We proudly serve Henderson, Sunnyvale, Newark, Lawrence, Cupertino, Laurel, Hillsdale, Santa Clara, Highlands, San Mateo, as well as Southgate, California

Mold Removal Questions and Answers

What are the Most Common Places You'll Find Mold in your home or business?

Mold can be found anywhere. It’ll sometimes be concealed in the most unforeseen places. With that said, mold can only grow in areas where there’s humidity. Here is a list of locations to look in the event that you suspect that you may have mold in your house.

  1. Chimneys – The areas between the bricks collect water and grime. This makes it a great location for mold to hide out. To remove the mold, change any rusted caps and contact a chimney sweep. They’ll be able to obtain the mold from the chimney and they’ll also get any harmful creosote. This will assist your chimney to operate properly.
  2. Refrigerator Drip Pans – Underneath your refrigerator you’ll get a lot of humidity from spills and from condensation. This makes it a prime location for mold to collect and grow. To remove the mold, spray the pan with hydrogen peroxide. Then, wipe the pan clean with white vinegar. For best results, clean the floor underneath the fridge too.
  3. Front Loading Washers – The door of a front loading washer will get wet when in use. When it’s not in use and the entrance-way is closed, mold can and can collect on the entrance-way. To remove the mold, clean the door and gasket before shutting. If you notice mold collecting, run some warm water with chlorine bleach. The mixture should wipe out any mold which has collected.
  4. Windows Seals – Condensation gathers there sufficient reason for the mixture of water and grime, the windows are a excellent place for mold to multiply and grow. To remove, open up the window after a heavy rain. Wipe the moisture in the windows. If the seals between the windows are failing, replace them. Washing your window frequently will prevent the growth of mold.
  5. Dishes – Once you stack meals that are still wet, it offers the perfect environment for mold to cultivate. To remove the mold, place the dishes within a dishwasher. You should wipe the cabinets with some vinegar to wipe out any mold that may be gathering there as well. When done washing the dishes, dry them completely before putting away.
  6. Air Conditioners – When operating, these trap grime and dust and collect moisture in the air. This provides food and humidity for mold to cultivate. To remove the mold from your own AC, remove the front plate and use a HEPA vacuum to eliminate the mold. Then, clean the drain pan with bleach and water.
  7. Bathroom Bathtub – After going for a shower or bath, humidity has collected for the sides of the tub. This makes it a perfect location for mold to collect and grow. To remove, mix bleach and water within a spray bottle and spray it onto the affected area. Wipe off after a few minutes.

If you think you have smelled mold in your hole or in the event that you suspect it might be in your house, these are good locations to look. Mold can conceal anywhere, rendering it difficult to find. But just remember that mold can only grow where there is moisture for it to cultivate. If mold is found, remove it at the earliest opportunity.


How You Can Inspect for Mold

If you think that you have mold in your house, it is important that you have a mold inspection. Mold could cause sickness in people, so it’s important that you get the issue fixed. To completely inspect your home for mold, you should know where to look. Just follow these pointers.

Where to Find Mold

  1. Check places which are full of humidity. For mold to cultivate it needs humidity, so this ought to be the very first places you look for mold. Be sure you look in locations such as under your sinks and in the cellar.
  2. Check for locations that have been recently damaged with water. Have you lately experienced any floods? If that’s the case, check the location of the flood. Check your water pipes too. Have you recently experienced a water pipe burst? If the water was not cleaned up correctly, that is where you might have a mold issue.
  3. Examine your ceilings and walls cavities. The spacing between the walls are a excellent place for mold to hide, especially since they are sealed off and capture moisture. Occasionally piping may drip, as well, which will include more moisture in the middle of your walls. Mold growing in these areas will continue steadily to spread so it’s particularly important that you find it before it starts to become visible.
  4. Check your bath curtains. Once you bath, dirt and hair shampoo mix, and leave a residue behind that is clearly a perfect location for mold to cultivate. Unless you clean down your bath curtain after every bath, there will be extra moisture that may allow for mold to grow.
  5. Check your household air ducts. If your house has central cooling or central heating system, your vents will encounter fluctuations in humidity. Due to the mixture between very hot and cold, moisture tends to collect on and in the drain pans. The vents will become a prime location for mold to grow.


How to Look for Mold

  1. Make use of an in-home mold tests kit. The mold tests sets come with their own tests instruments. Whatever you must do is follow the guidelines given. However, be aware that these sets are hard to use and the outcomes can often be unreliable.
  2. Hire a professional mold inspector. A professional will have a number of various instruments and products used for detecting mold. Before hiring a professional, check with your state’s contractor-licensing board to ensure that they are licensed to remove mold.
  3. Check the infected area usually after washing. If there was mold underneath your bathroom sink, check that area regularly. If you find that the mold has reappeared following the washing, the washing was not efficient, and you have to get that area cleansed again.

Inspecting your home for mold is especially important. You need to know where to look, and ways to get rid of mold if you find it. Leaving behind the mold where you find it could potentially put someone’s life at risk when the mold problem is not fixed immediately.

Is Mold Dangerous?

Did you know that that some mold could be more poisonous to you and your body than pesticides? It’s been shown a large number of homes have mold in them; up to 25%. Many people are at risk for mold poisoning. It doesn’t matter your actual age, gender, or the weather your home is in – mold could be there.

Mold leads to a bunch of different medical issues. It can also be fatal, despite what some individuals say. Some people aren’t as delicate to mold as others are, but mold will cause medical issues. A few of these include:

  1. Rash – Some people are allergic to mold that may then cause a rash to appear on their body. In severe cases, mold could cause inflammation within your throat. It isn’t rare for mold to create rashes and hives show up.
  2. Coughing – Mold spores are very light and travel by air. It is very easy for mold spores to become inhaled. If they are inhaled, it generates irritation in the liner of your neck, making you cough.
  3. Sore Throat – If you’re allergic to mold, a aching throat is your body’s method of defending itself in the allergen. Your disease fighting capability sees the mold as a danger as well as your throat can inflame in reaction. Inhaling the mold spores may also cause a aching throat. The mold spores could cause irritation within your throat, lungs, and airways.
  4. Asthma – Mold doesn’t necessarily cause asthma, but mold can bring on asthma assaults in people who have asthma. When exposed to mold, the person’s signs and symptoms will get worse. You may encounter more asthma assaults, a very restricted chest, as well as the assaults will seem much longer than usual.
  5. Fatigue – Exposure to mold can make it difficult to breathe for those who have pneumonia or additional respiratory problems. The issue in breathing could make you feel tired.

A few of these symptoms are very standard if you’ve been exposed to mold. Others are more rare. A lot of people who have experienced an exposure to mold get a rash, cough, or a aching throat. It is very common for those who have asthma with an increase in asthma assaults. It’s not as common though for you to feel tired.

If you’ve been exposed to mold and are experiencing any persistent signs and symptoms, as well as if all of your signs and symptoms are not listed here, you should go see a medical expert. You will need instant treatment as well as the fast eradication of the mold. It is vital that you pay attention to what your physician tells you to do. People have died from an excessive amount of exposure to mold.

Mold allergies vary in every person. Some people may not be affected whatsoever. Others may encounter year-round symptoms caused by mold, or they could only experience soreness during certain times of the year. Generally those signs and symptoms will occur within the wetter months.

In conclusion, depending on the type of mold, it could be harmful to people of all ages. In the event that you believe that all of your signs and symptoms are caused by mold you’ve come in contact with, alert your physician.

How to Identify a Mold Problem

Play Video about sunnyvale california mold removal

Schedule Your Southgate Mold Removal Today and we will get someone out immediately, 24-hours a day, 7-days a week!

Call Now ButtonCall for a Free Estimate!